Deep Groove Ball Bearings
Deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds,Good radial load capacity.Acceptable axial load capacity in both directions.Have low torque capacity at startup and running speeds.Can operate with low noise,Require little maintenance
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- 20 mm x 47 mm x 14 mm NACHI 6204-2NKE deep groove ball bearings
- B04144
- Bearings
- 95 mm x 145 mm x 24 mm FAG 6019 deep groove ball bearings
- B04144
- Bearings
- 120 mm x 150 mm x 16 mm ISB 61824-2RZ deep groove ball bearings
- B04144
- Bearings
- 45,000 mm x 100,000 mm x 25,000 mm SNR 6309KEE deep groove ball bearings
- 3 Inch | 76.2 Millim
- 2.188 Inch | 55.575
- 15 mm x 42 mm x 13 mm NACHI 6302 deep groove ball bearings
- 1.102 Inch | 28 Mill
- 31171531
- 38,1 mm x 80 mm x 56,3 mm SNR EX208-24 deep groove ball bearings
- B04144
- Bearings
- 1,2 mm x 4 mm x 2,5 mm FBJ MR41XZZ deep groove ball bearings
- 1.102 Inch | 28 Mill
- 31171531
- 30 mm x 62 mm x 16 mm KBC 6206DD deep groove ball bearings
- 11,2 Kg
- 555 kN