NTN DRIVESHAFT ANDERlu, INC.

Self Aligning Ball Bearings

Self-aligning ball bearings have two rows of balls, a common sphered raceway in the outer ring and two deep uninterrupted raceway grooves in the inner ring. They are available open or sealed. The bearings are insensitive to angular misalignment of the shaft relative to the housing (fig. 1), which can be caused, for example, by shaft deflection.

In a self-aligning bearing, the inner ring has two raceways and the outer ring has a single spherical raceway with its center of curvature coincident with the bearing axis. This allows the axis of the inner ring, balls and cage to deflect around the bearing center to automatically correct misalignment caused by housing and shaft machining or installation error.

A self-aligning bearing is recommended when the alignment of the shaft and housing is difficult or when the shaft may bend during operation. Brda notes that similar to deep groove ball bearings, most self-aligning ball are for general use.

AST 2321 self aligning ball bearings
IKO
88,2 kN
95 mm x 170 mm x 32 mm NSK 1219 self aligning ball bearings
IKO
88,2 kN
ISB TSF 20 BB-E self aligning ball bearings
120x215x40
40
30 mm x 72 mm x 27 mm KOYO 2306 self aligning ball bearings
Cast Iron
2-7/32 in
Toyana 2321K self aligning ball bearings
4.9375 in
19.7030 in
Toyana 2312K+H2312 self aligning ball bearings
120x215x40
40
Toyana 1211K self aligning ball bearings
Cast Iron
2-7/32 in
◂ Previous page Next page ▸
All Products Contact Now
Product Categories
Angular Contact Ball Bearings
Bearing Units
Deep Groove Ball Bearings
Needle Roller Bearings
Plain Bearings
Self Aligning Ball Bearings
Spherical Roller Bearings
Tapered Roller Bearings
Thrust Ball Bearings
Thrust Roller Bearings
Wheel Bearings
Cylindrical Roller Bearings
608zz Bearing
l44649 Bearing
Bearing 6901 Bearing
lm20uu Bearing