Deep Groove Ball Bearings
Deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds,Good radial load capacity.Acceptable axial load capacity in both directions.Have low torque capacity at startup and running speeds.Can operate with low noise,Require little maintenance
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- 600,000 mm x 870,000 mm x 118,000 mm NTN 60/600 deep groove ball bearings
- 1.102 Inch | 28 Mill
- 31171531
- 5 inch x 142,875 mm x 7,938 mm INA CSCB050 deep groove ball bearings
- 0.0
- MOLINE BEARING
- 40 mm x 62 mm x 12 mm NKE 61908 deep groove ball bearings
- B04144
- Bearings
- 160 mm x 220 mm x 28 mm KOYO 6932 deep groove ball bearings
- 11,2 Kg
- 555 kN
- 65 mm x 120 mm x 23 mm Timken 213NPP deep groove ball bearings
- 1.102 Inch | 28 Mill
- 31171531
- 40 mm x 80 mm x 18 mm NSK 6208ZZ deep groove ball bearings
- 1.102 Inch | 28 Mill
- 31171531
- Toyana 62314-2RS deep groove ball bearings
- B04144
- Bearings