Deep Groove Ball Bearings
Deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds,Good radial load capacity.Acceptable axial load capacity in both directions.Have low torque capacity at startup and running speeds.Can operate with low noise,Require little maintenance
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- 120 mm x 150 mm x 16 mm ZEN S61824 deep groove ball bearings
- 3 Inch | 76.2 Millim
- 2.188 Inch | 55.575
- 20 mm x 47 mm x 14 mm ISB 6204-ZZ deep groove ball bearings
- B04144
- Bearings
- 1000 mm x 1220 mm x 100 mm ISO 618/1000 deep groove ball bearings
- 3 Inch | 76.2 Millim
- 2.188 Inch | 55.575
- 60 mm x 130 mm x 54 mm ISO 63312 ZZ deep groove ball bearings
- 1.102 Inch | 28 Mill
- 31171531
- 44,45 mm x 100 mm x 58,7 mm SNR EX309-28 deep groove ball bearings
- 1.102 Inch | 28 Mill
- 31171531
- 5,000 mm x 13,000 mm x 4,000 mm NTN F-695AZZ deep groove ball bearings
- 3 Inch | 76.2 Millim
- 2.188 Inch | 55.575
- 70 mm x 125 mm x 48,5 mm INA E70-KRR deep groove ball bearings
- 12303 #3
- 0 Inch | 0 Millimete
- INA RCSMB17/65-FA106 deep groove ball bearings
- 1.102 Inch | 28 Mill
- 31171531