Self Aligning Ball Bearings
Self-aligning ball bearings have two rows of balls, a common sphered raceway in the outer ring and two deep uninterrupted raceway grooves in the inner ring. They are available open or sealed. The bearings are insensitive to angular misalignment of the shaft relative to the housing (fig. 1), which can be caused, for example, by shaft deflection.
In a self-aligning bearing, the inner ring has two raceways and the outer ring has a single spherical raceway with its center of curvature coincident with the bearing axis. This allows the axis of the inner ring, balls and cage to deflect around the bearing center to automatically correct misalignment caused by housing and shaft machining or installation error.
A self-aligning bearing is recommended when the alignment of the shaft and housing is difficult or when the shaft may bend during operation. Brda notes that similar to deep groove ball bearings, most self-aligning ball are for general use.
- Toyana 2210K-2RS self aligning ball bearings
- 37 mm
- 65x160x37
- 55 mm x 100 mm x 25 mm ISB 2211-2RSKTN9 self aligning ball bearings
- 15,875 mm
- 15,875
- 35 mm x 80 mm x 31 mm SKF 2307EKTN9 self aligning ball bearings
- Cast Iron
- 2-7/32 in
- 75 mm x 160 mm x 55 mm NTN 2315S self aligning ball bearings
- 5.5000 in
- USFB 5000
- 85 mm x 180 mm x 60 mm ISB 2317 K self aligning ball bearings
- Cast Iron
- 2-7/32 in
- 35 mm x 72 mm x 17 mm FAG 1207-TVH self aligning ball bearings
- 4.9375 in
- 19.7030 in
- 100 mm x 180 mm x 46 mm NKE 2220-K self aligning ball bearings
- 37 mm
- 65x160x37
- 70 mm x 150 mm x 35 mm ISB 1314 self aligning ball bearings
- Commercial
- .5620 in
- 80 mm x 140 mm x 26 mm NTN 1216S self aligning ball bearings
- Commercial
- .5620 in
- Toyana 1205K self aligning ball bearings
- 120x215x40
- 40