Self Aligning Ball Bearings
Self-aligning ball bearings have two rows of balls, a common sphered raceway in the outer ring and two deep uninterrupted raceway grooves in the inner ring. They are available open or sealed. The bearings are insensitive to angular misalignment of the shaft relative to the housing (fig. 1), which can be caused, for example, by shaft deflection.
In a self-aligning bearing, the inner ring has two raceways and the outer ring has a single spherical raceway with its center of curvature coincident with the bearing axis. This allows the axis of the inner ring, balls and cage to deflect around the bearing center to automatically correct misalignment caused by housing and shaft machining or installation error.
A self-aligning bearing is recommended when the alignment of the shaft and housing is difficult or when the shaft may bend during operation. Brda notes that similar to deep groove ball bearings, most self-aligning ball are for general use.
- 110 mm x 240 mm x 50 mm KOYO 1322 self aligning ball bearings
- Commercial
- .5620 in
- ISB TSF 10 BB-O self aligning ball bearings
- 85 mm
- 1.5 mm
- 5 mm x 19 mm x 6 mm NSK 135 self aligning ball bearings
- 37 mm
- 65x160x37
- 90 mm x 160 mm x 40 mm NTN 2218S self aligning ball bearings
- 37 mm
- 65x160x37
- 12 mm x 32 mm x 14 mm SKF 2201E-2RS1TN9 self aligning ball bearings
- 5.5000 in
- USFB 5000
- Toyana 2205K-2RS self aligning ball bearings
- 85 mm
- 1.5 mm
- 95 mm x 200 mm x 67 mm NKE 2319 self aligning ball bearings
- Cast Iron
- 2-7/32 in