Angular Contact Ball Bearings
Angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one direction. NTN can preload the bearings at the factory so that the correct load will develop once the bearing is put into service. The bearings in this series are assembled with a specific internal clearance, so that they will have a specified contact angle under load. The standard contact angle used by NTN is 30° but, in many cases, a 40° contact angle can also be specified. We also offer special high-speed bearings with phenolic resin cages with a 15° contact angle.
Angular contact ball bearings have an inner and outer ring with a double raceway. The two rows are so related that the contact angle is similar to a pair of back-to-back single row bearings. NTN’s 5200 and 5300 series offer continuous races and can carry thrust loads in either direction. The 3200 and 3300 series have filling slots, so it is necessary to mount them with the thrust load acting against the un-notched face of the rings.
- Toyana 7024 B angular contact ball bearings
- Inch
- Double Row | Single
- 50 mm x 110 mm x 27 mm SKF 7310 BEGAPH angular contact ball bearings
- 8483.20.40.80
- 1 Piece Solid
- 100 mm x 140 mm x 20 mm NSK 100BNR19S angular contact ball bearings
- Inch
- Double Row | Single
- 70 mm x 90 mm x 10 mm NTN 5S-7814CG/GNP42 angular contact ball bearings
- Inch
- Double Row | Single
- 140 mm x 210 mm x 33 mm NTN HSB028C angular contact ball bearings
- Roller Assembly Plus
- 2.559 Inch | 65 Mill
- 120 mm x 165 mm x 22 mm SKF 71924 ACB/HCP4A angular contact ball bearings
- Inch
- Double Row | Single
- 85 mm x 180 mm x 41 mm SIGMA QJ 317 N2 angular contact ball bearings
- 8483.20.40.80
- 1 Piece Solid