Angular Contact Ball Bearings
Angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one direction. NTN can preload the bearings at the factory so that the correct load will develop once the bearing is put into service. The bearings in this series are assembled with a specific internal clearance, so that they will have a specified contact angle under load. The standard contact angle used by NTN is 30° but, in many cases, a 40° contact angle can also be specified. We also offer special high-speed bearings with phenolic resin cages with a 15° contact angle.
Angular contact ball bearings have an inner and outer ring with a double raceway. The two rows are so related that the contact angle is similar to a pair of back-to-back single row bearings. NTN’s 5200 and 5300 series offer continuous races and can carry thrust loads in either direction. The 3200 and 3300 series have filling slots, so it is necessary to mount them with the thrust load acting against the un-notched face of the rings.
- 40 mm x 62 mm x 12 mm SNR ML71908CVUJ74S angular contact ball bearings
- Roller Assembly Plus
- 2.559 Inch | 65 Mill
- ISO QJ1026 angular contact ball bearings
- Bearings
- B04270
- AST 5212ZZ angular contact ball bearings
- B04144
- 1.8
- 20 mm x 47 mm x 14 mm SNFA E 220 /NS 7CE1 angular contact ball bearings
- 31171501
- 5.1 Inch | 130 Milli
- 130 mm x 200 mm x 33 mm SNR 7026CVUJ74 angular contact ball bearings
- Inch
- Double Row | Single
- ILJIN IJ123007 angular contact ball bearings
- Standard
- 5900
- 32 mm x 73 mm x 54 mm KOYO DAC3273W angular contact ball bearings
- Inch
- Double Row | Single
- 100 mm x 150 mm x 24 mm KOYO HAR020CA angular contact ball bearings
- 31171501
- 5.1 Inch | 130 Milli
- 40 mm x 90 mm x 23 mm ISO 7308 C angular contact ball bearings
- Steel
- 25 Degree
- 10,000 mm x 30,000 mm x 9,000 mm NTN 7200BG angular contact ball bearings
- Roller Assembly Plus
- 2.559 Inch | 65 Mill