Deep Groove Ball Bearings
Deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds,Good radial load capacity.Acceptable axial load capacity in both directions.Have low torque capacity at startup and running speeds.Can operate with low noise,Require little maintenance
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- 40 mm x 110 mm x 27 mm SKF 6408 deep groove ball bearings
- 3 Inch | 76.2 Millim
- 2.188 Inch | 55.575
- SNR AB43026S01 deep groove ball bearings
- Flanged
- 31.19
- Toyana 634-2RS deep groove ball bearings
- 1.102 Inch | 28 Mill
- 31171531
- 1,984 mm x 6,35 mm x 2,38 mm ISB R1-4 deep groove ball bearings
- B04144
- Bearings
- 30 mm x 42 mm x 7 mm SKF W 61806-2RS1 deep groove ball bearings
- 12303 #3
- 0 Inch | 0 Millimete
- 45 mm x 85 mm x 19 mm KOYO 6209NR deep groove ball bearings
- 0.0
- MOLINE BEARING
- 85 mm x 130 mm x 22 mm KBC 6017ZZ deep groove ball bearings
- 0.0
- MOLINE BEARING