Deep Groove Ball Bearings
Deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds,Good radial load capacity.Acceptable axial load capacity in both directions.Have low torque capacity at startup and running speeds.Can operate with low noise,Require little maintenance
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- 35 mm x 72 mm x 17 mm Timken 207WG deep groove ball bearings
- 0.0
- MOLINE BEARING
- 95 mm x 170 mm x 32 mm NACHI 6219Z deep groove ball bearings
- 12303 #3
- 0 Inch | 0 Millimete
- 4 mm x 12 mm x 4 mm NSK 604 deep groove ball bearings
- Flanged
- 31.19
- 45 mm x 85 mm x 19 mm Timken 209WD deep groove ball bearings
- 11,2 Kg
- 555 kN
- 75 mm x 130 mm x 25 mm KOYO 6215N deep groove ball bearings
- B04144
- Bearings
- 40 mm x 80 mm x 18 mm Timken 208WD deep groove ball bearings
- 12303 #3
- 0 Inch | 0 Millimete
- SNR UC206-20 deep groove ball bearings
- 3 Inch | 76.2 Millim
- 2.188 Inch | 55.575
- 12 mm x 32 mm x 10 mm ISO SC201-2RS deep groove ball bearings
- 3 Inch | 76.2 Millim
- 2.188 Inch | 55.575
- 55 mm x 100 mm x 55.6 mm SKF YAR 211-2FW/VA228 deep groove ball bearings
- 1.102 Inch | 28 Mill
- 31171531